{"id":863,"date":"2026-11-20T15:24:14","date_gmt":"2026-11-20T07:24:14","guid":{"rendered":"http:\/\/www.divrigidernegi.com\/blog\/?p=863"},"modified":"2026-11-20T15:24:14","modified_gmt":"2026-11-20T07:24:14","slug":"how-to-package-egg-trays-made-from-equipment-4a89-e9e36f","status":"publish","type":"post","link":"http:\/\/www.divrigidernegi.com\/blog\/2026\/11\/20\/how-to-package-egg-trays-made-from-equipment-4a89-e9e36f\/","title":{"rendered":"how to package egg trays made from equipment"},"content":{"rendered":"<p>Alright, let\u2019s keep this real\u2014you know, I get it. You\u2019re deep in the egg tray game, either you just dropped big cash on a new egg tray machine from us, or you\u2019re looking to make sure your existing setup is actually pulling its weight when it comes to packaging the final trays. I\u2019ve been talking to clients about this for years, and half the time, people sleep on the packaging step like it\u2019s just \u201cthrowing boxes and tape around.\u201d Newsflash: that\u2019s how you get trays crushed before they even hit the grocery store, or (worse) shipped out as your own product with dented cells. Let\u2019s break this down like we\u2019re hanging out in our workshop, not a stuffy trade show. <a href=\"https:\/\/www.shineyemach.com\/egg-tray-equipment\/\">egg Tray Equipment<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.shineyemach.com\/uploads\/47354\/small\/precision-gypsum-block-linecc083.jpg\"><\/p>\n<p>First off, let\u2019s start with the stuff your machine spits out. Wait\u2014you\u2019re using our equipment, right? Our machines crank out those paper-pulp trays that are still a <em>little<\/em> damp when they hit the conveyor at the end. Don\u2019t even think about packaging them right away. I see people make this mistake all the time: they pull a fresh stack of trays off the drying line and start boxing them, and by the time they get to the customer, the pulp\u2019s dried in a way that\u2019s warped because they were smooshed tight while wet. Trust me, our operators have tested this\u2014you need to let those trays reach a <em>consistent<\/em> ambient moisture level first. We\u2019re talking 8-12% moisture content, not the 20% they\u2019re at when they exit the press. How do you check that? No fancy lab gear needed\u2014grab a moisture meter (you can get one at any hardware store, nothing fancy) or even just squeeze a corner: if it springs back without feeling squishy, you\u2019re good to go. Skipping this step is like baking cookies and taking them out before they\u2019re done\u2014they fall apart the second you touch \u2019em.<\/p>\n<p>Next, pick the right packaging materials, and don\u2019t just go for the cheapest option. Let\u2019s list what you actually need here, and why: first, the base. You can use corrugated boxes, obviously, but not just any corrugated. If you\u2019re shipping locally, standard single-wall works, but if you\u2019re sending them cross-country or even overseas? Double-wall, hands down. Those flutes add so much more cushioning, especially when a forklift slams into the pallet at the warehouse. Then, you need something to separate the layers of trays, right? Our trays come in stacks of 10 or 12, and if you just stack 50 stacks on top of each other, the bottom ones get crushed. So interleave those stacks with either thin kraft paper or even those cheap plastic sheets you can get at any packaging supply place. Wait, and don\u2019t forget the edge protectors! If your boxes are sticking out beyond the pallet, those corners get beat up during shipping. Edge protectors (those little cardboard U-shaped things) slip over the box corners and take all the impact. I\u2019ve had clients tell me they saved hundreds in damaged trays just by adding these. Also, tape\u2014use heavy-duty packing tape, not that cheap stuff you use for moving boxes across your garage. 2-inch acrylic tape is the way to go; it sticks in rain, snow, whatever, and doesn\u2019t come undone halfway through a cross-country road trip.<\/p>\n<p>Wait, speaking of stacking\u2014how do you actually arrange the trays <em>inside<\/em> the box? That\u2019s the part most people get wrong. You don\u2019t just dump a bunch of stacks in there haphazardly. Our trays are usually either 30-egg or 12-egg, right? For smaller trays, you want to stack them vertically, not horizontally. Wait, let me clarify: vertical means the open side of the tray is facing up, so the egg cups aren\u2019t getting compressed. If you stack them horizontally, the weight of the top stacks will push those cups flat, and that\u2019s useless. So arrange the stacks in the box in a grid\u2014like 5 stacks long, 4 stacks wide, whatever fits, but leave a little breathing room on the sides (about an inch or so) so when you close the box, you\u2019re not smooshing the edges of the trays. Oh, and put a layer of that kraft paper on the very bottom of the box, before you add any trays, and another layer on top before you close it. That way, if dust or dirt gets in during handling, it doesn\u2019t settle on the trays, and it adds a tiny bit of extra cushioning.<\/p>\n<p>Now, palletizing\u2014this is where you can make or break your whole operation, especially if you\u2019re working with our big automatic tray equipment that cranks out thousands per hour. First, don\u2019t mix tray types on the same pallet. Wait, yeah, I know it\u2019s tempting to save space, but if you\u2019re mixing 30-egg and 12-egg trays, the different heights will make the pallet uneven, and when a truck hits a pothole, that whole stack tilts and trays break. Stick to one tray size per pallet, always. Then, the pallet itself\u2014use heat-treated wooden pallets, not those cheap pallets you get for free at a hardware store that might have bugs. Wait, no, actually, heat-treated is required for international shipping anyway, so might as well just use that for everything. And when you\u2019re stacking the boxes on the pallet, use a pattern that\u2019s stable. The most common is the block pattern, right? You just lay each row straight, but if you want extra stability, use a brick pattern\u2014each row is offset so the boxes lock into each other. That way, the whole pallet doesn\u2019t slide sideways during shipping. Also, don\u2019t stack too high! Our clients often want to fit as many boxes as possible, but if you stack more than 10 boxes high, the bottom boxes get crushed. I recommend max 8 boxes per pallet, unless you\u2019re using double-wall boxes, then maybe 10. Test it: if you stack a pallet and you can push the top box down an inch, that\u2019s too high.<\/p>\n<p>And don\u2019t skip the stretch wrap or strapping. Wait, which one is better? Honestly, it depends on how you\u2019re moving the pallets. If you\u2019re just using a forklift inside a warehouse, stretch wrap is fine\u2014just wrap it tight, not so tight you crush the boxes. But if you\u2019re shipping long distances, strapping is a must, because stretch wrap can tear if it gets caught on something. I like to use both, actually\u2014wrap the pallet in stretch first, then add two or three straps around the sides (top, middle, bottom) for good measure. That way, even if the stretch wrap tears, the straps hold the whole thing together. Also, add a label! Wait, not just any label\u2014make sure it has the type of tray, the quantity, and handle with care (fragile is overused, but these are fragile, so it\u2019s okay). And if it\u2019s being shipped overseas, make sure all the labels are in the right language, but that\u2019s a whole other thing.<\/p>\n<p>Wait, let\u2019s talk about common mistakes I see all the time, because that\u2019s what this is about\u2014stuff you can fix right now, no new equipment needed. First, rushing the drying step. I get it, you want to get those trays out the door, but if they\u2019re too damp when packaged, they\u2019ll mold. Yep, mold. I had a client last year who packaged trays that were 15% moisture, and by the time they got to the customer, half the trays had green mold growing on them. That\u2019s a quick fix: add a little extra drying time. We usually recommend a drying conveyor after our equipment, but even if you\u2019re air-drying, just set up a few fans by the conveyor, that speeds it up. Second, using the wrong size boxes. If your box is too small, you\u2019re smooshing the trays; too big, and the trays slide around and hit the edges. Measure your stack of trays first\u2014length, width, height\u2014and then buy boxes that are \u00bd inch bigger on each side. That tiny gap makes a huge difference. Third, not considering the environment. If you\u2019re shipping to a place that\u2019s really hot and humid, add a desiccant packet inside the box. Those little silica gel packs (you know, the ones that say \u201cdo not eat\u201d) absorb moisture, so your trays don\u2019t warp or get moldy. Super cheap, like a cent each, why not?<\/p>\n<p>Wait, and a quick note if you\u2019re using our semi-automatic or fully automatic egg tray equipment. We actually design our lines to integrate with packaging equipment, right? So if you have our equipment, you can even add an automatic wrapper or a palletizer that does all this stuff for you, so you don\u2019t have to hire extra labor to stack and package. That\u2019s a big one\u2014our clients who upgrade to the automatic packaging line see a 30% drop in labor costs, because one person can oversee the whole packaging process instead of two or three. No more tired workers stacking trays wrong at the end of a long shift.<\/p>\n<p>Let me test this with a real example, because stories stick. Last month, we had a client in Ohio who had been using a different brand of egg tray equipment, and their packaging was a mess\u2014they were getting a 12% damage rate, which is huge, especially when you\u2019re selling trays by the pallet. They switched to our line, and followed exactly the steps I just told you: waited for 10% moisture, used double-wall boxes, interleave paper, edge protectors, brick pallet pattern, stretch wrap plus straps. Their damage rate dropped to 1.5% in the first month. That\u2019s not a fluke\u2014this works. They saved like $2,000 a month on damaged trays, just by changing how they package.<\/p>\n<p>So, if you\u2019re already rocking our egg tray equipment, chances are you\u2019re not using the full potential of your setup, and the packaging step is where you\u2019re losing money. If you\u2019re still in the market for equipment, this packaging part should be part of your conversation\u2014any good supplier (that\u2019s us, obviously) will walk you through the packaging needs for your specific output, because a line that cranks out 10,000 trays an hour needs a different packaging setup than one that does 1,000.<\/p>\n<p>Wait, before I wrap this up, remember: this is all about balancing speed and quality. You don\u2019t want to take 2 hours packaging a pallet that should take 20 minutes, but you also don\u2019t want to ship a pallet of trash because you cut corners. The steps I laid out take a little extra time upfront, but they save you so much money on returns, damaged goods, and unhappy customers.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.shineyemach.com\/uploads\/47354\/small\/horizontal-dry-mortar-mixing-plant59939.jpg\"><\/p>\n<p>If you\u2019re feeling stuck\u2014like you\u2019ve tried all this and still have issues, or you\u2019re ready to upgrade your equipment to make packaging even easier\u2014hit us up. We don\u2019t do stuffy sales pitches; we\u2019ll walk through your specific setup, answer all your questions, no pressure. Whether you need tips on adjusting your current process or want to talk about new equipment that simplifies packaging, we\u2019re here. Don\u2019t let bad packaging ruin all the hard work you put into making great egg trays.<\/p>\n<p><a href=\"https:\/\/www.shineyemach.com\/cement-mortar-mixing-plant\/special-mortar-mixing-plant\/\">Special Mortar Mixing Plant<\/a> References:<\/p>\n<ol>\n<li>American Pulp and Paper Association. (2021). Best Practices for Packaging Molded Pulp Products.<\/li>\n<li>International Safe Transit Association. (2022). Packaging Guidelines for Paper-Based Shipping Products.<\/li>\n<li>Egg Industry Association. (2023). Post-Production Handling and Packaging for Egg Trays.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.shineyemach.com\/\">Shineye Mach Co., Ltd.<\/a><br \/>Shineye Mach Co., Ltd. is one of the most reliable manufacturers and suppliers of egg tray equipment in China, also supports customized service with reasonable price. Please feel free to buy advanced egg tray equipment made in China here from our factory. For quotation, contact us now.<br \/>Address: Jinzhou Circular Industry Park, Jinzhou City, Shijiazhuang City, Hebei Province, China<br \/>E-mail: xiangyijixielucia@yeah.net<br \/>WebSite: <a href=\"https:\/\/www.shineyemach.com\/\">https:\/\/www.shineyemach.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Alright, let\u2019s keep this real\u2014you know, I get it. You\u2019re deep in the egg tray game, &hellip; <a title=\"how to package egg trays made from equipment\" class=\"hm-read-more\" href=\"http:\/\/www.divrigidernegi.com\/blog\/2026\/11\/20\/how-to-package-egg-trays-made-from-equipment-4a89-e9e36f\/\"><span class=\"screen-reader-text\">how to package egg trays made from equipment<\/span>Read more<\/a><\/p>\n","protected":false},"author":192,"featured_media":863,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[826],"class_list":["post-863","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-egg-tray-equipment-4443-ea1acd"],"_links":{"self":[{"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/posts\/863","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/users\/192"}],"replies":[{"embeddable":true,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/comments?post=863"}],"version-history":[{"count":0,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/posts\/863\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/posts\/863"}],"wp:attachment":[{"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/media?parent=863"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/categories?post=863"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.divrigidernegi.com\/blog\/wp-json\/wp\/v2\/tags?post=863"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}