If you’ve ever spent time setting up a camera, telescope, or even a heavy garden tool, you know that nothing works as intended if the balance is off. As a mounts supplier who’s been building and tuning these tools for 12 years, I’ve lost count of how many times a customer has emailed me saying their brand-new mount isn’t performing like it should—nine times out of ten, the issue isn’t a defect in the mount itself, it’s simple poor balance. Mounts

Balance is the foundation of any mount, no matter if it’s a portable astrophotography rig, a fixed security camera setup, or a industrial camera mount used for manufacturing. When a mount is balanced, the motors don’t have to work overtime to hold heavy equipment steady, which reduces wear on gears and bearings, extends the mount’s lifespan, and gives you far smoother, more precise movement. Over the years, I’ve worked with hobbyists just starting out and professional teams relying on our mounts for daily work, and the best part is that adjusting balance doesn’t require fancy tools or a physics degree—it just takes patience and a little know-how.
First, let’s break down the two most important types of balance for most mounts: axis balance, specifically the right ascension (RA) and declination (Dec) axes for astronomy mounts, or horizontal and vertical axes for camera or industrial mounts. Every mount design is a little different, but the core principles stay the same. Let’s start with pre-adjustment checks, because skipping these steps is the number one mistake I see new makers make. Before you touch any knobs, make sure your mount is level. Most people ignore this, but if the mount itself isn’t sitting perfectly flat, any balance you do will be off. Use a simple bubble level on the mount’s base, or even a smartphone level app works for smaller setups. Also, make sure all your equipment is attached the way you’ll use it—don’t balance with a light camera if you plan to add a heavier lens later. That’s another common mistake: balancing for a test load instead of your actual setup.
Now, let’s get to the hands-on part. I’ll walk you through the process for a standard equatorial mount (the most common type for astronomy, which is what most of our customers use) since it’s a perfect example of how balance works across all mount types. For equatorial mounts, you have two axes: the RA axis (which rotates to track the sky as Earth spins) and the Dec axis (which moves the mount up and down to point at different parts of the sky).
Starting with the RA axis. Loosen the clutch that holds the mount in place for the RA axis. Make sure your counterweight is positioned loosely on the counterweight shaft at this point. Now, gently push the mount to the left and right (along the RA axis) until it’s roughly centered. Then, let go. If the mount immediately drops to one side, it’s out of balance towards that side. If it stays perfectly still no matter which position you put it in, you’re good for now—though you’ll likely need to tweak the counterweight. Most mounts have a heavy counterweight that slides along a metal shaft. If the mount drops to the side where the equipment is, slide the counterweight a little further away from the RA axis (towards the end of the shaft) to add weight to the other side. If it drops to the side of the counterweight, slide it closer to the RA axis to reduce its effective weight. Do this in small increments—even a 1/4 inch slide can make a big difference. Once the mount stays in any position you move it to along the RA axis, that part is done.
Next is the Dec axis. This is often trickier because the equipment (like a telescope or camera) is off to one side of the Dec axis pivot. Again, loosen the Dec clutch so you can move the mount freely up and down. Hold the mount in a horizontal position (parallel to the ground) and let go. If the end with your equipment drops down, that side is heavier. If it lifts up, the counterweight side (usually a small Dec counterbalance) is heavier. Most mounts have a small adjustment weight or a way to shift the position of the equipment relative to the Dec pivot. For example, if your camera is too far from the Dec pivot, it adds leverage that makes that side heavy. Slide the camera or telescope a little closer to the pivot point to reduce that leverage. If that’s not enough, adjust the small Dec counterweight on the opposite side of the pivot. Again, small tweaks work here—don’t move anything more than half an inch at a time. I always tell customers to test the Dec balance in multiple positions, not just horizontal. Tilt the mount up 45 degrees, let go, and check if it stays. Tilt it straight up, same test. If it holds every time, your Dec balance is set.
Wait a second—what if you have a very heavy load, like a 12-inch telescope on a mount? I get this question all the time. Large, heavy equipment changes the dynamics because gravity has a bigger effect on heavier loads. The key here is to not force the counterweights too far—most mounts have a maximum distance the counterweight can slide, because beyond that, you risk damaging the shaft or the RA axis. If your load is so heavy that even sliding the counterweight all the way doesn’t balance it, you probably need an additional balance weight or a custom counterweight set. That’s why we design our mounts with load capacity ratings that leave a little extra room for this kind of adjustment. I once had a pro photographer customer call me panicking because his industrial mount for a 50-pound camera wouldn’t balance—turns out he was using a standard counterweight set meant for 30-pound loads, so we sold him a pair of extra 20-pound weights, and he was good to go.
Another common issue is “dynamic balance” vs “static balance.” Static balance is what we just talked about—balancing when the mount is not moving. But dynamic balance matters too, especially if you’re using your mount for long exposures or fast pan/tilt movements. A mount that’s statically balanced might wobble when it starts moving, which is a sign that the balance isn’t perfect for motion. To check dynamic balance, gently turn the RA axis motor on (at a low speed) and watch if the mount moves smoothly, or if it jerks to one side. If it jerks, go back and adjust the RA balance slightly—usually shifting the counterweight a tiny fraction of an inch fixes this. For Dec axis, move the Dec motor slowly and check for smooth movement. Most modern mounts have built-in balance alerts or motor current readouts in their control software, which is a huge help. If your mount has this feature, aim for the lowest motor current possible while still getting full movement—lower current means less strain and better balance.
I’ve seen too many people skip this step because it seems tedious, but I can’t stress enough how much of a difference it makes. A few months ago, a hobbyist emailed me saying his astrophotography shots were blurry, and he’d tried upgrading his camera and lens to fix it. When I asked about balance, he admitted he’d never adjusted it—he’d just tightened the clutches until it didn’t move, which is the worst way to do it. After he adjusted the RA and Dec balance the way I walked him through, his next set of shots were sharp enough to see craters on the moon, no more blurriness from a wobbly mount. That’s the thing about balance: it’s not a one-time setup. If you add new equipment, switch lenses, or even move your mount from your workshop to an outdoor location, you need to rebalance it. Even temperature changes can slightly warp the structure of your mount or equipment, shifting the balance over time. I check my own personal mount every month, just to make sure.
Let’s also talk about common mistakes to avoid. First, don’t over-tighten clutches when you’re done adjusting. It’s easy to crank the knobs hard so the mount doesn’t move, but that puts unnecessary stress on the bearings and can actually throw your balance off. Tighten them just enough that the mount holds its position when you nudge it gently—no need for brute force. Second, don’t forget to balance when the mount is pointed at different parts of the sky. For equatorial mounts, the load on the Dec axis changes as you move the mount, so you might need a tiny adjustment when it’s pointed near the horizon versus straight up. It’s not a full rebalance, just a small tweak. Third, don’t use makeshift weights. I’ve seen people use dumbbells or even water jugs as counterweights, and while that might work in a pinch, it’s not precise. Our mounts are designed to work with calibrated counterweights, which makes adjustment easier and ensures they don’t slip off the shaft.
If you’re still struggling, don’t hesitate to reach out. Every customer’s setup is unique, and sometimes a small adjustment that works for one person doesn’t work for another. As a mounts supplier, I don’t just sell equipment—I help my customers get the most out of it. Whether you’re a hobbyist setting up your first astrophotography rig or a professional needing a mount that can handle heavy industrial loads, balancing is the single most important step to getting reliable results.
At the end of the day, balance is about working with physics, not against it. A well-balanced mount is easier to use, lasts longer, and gives you far better performance than an unbalanced one. It’s the small, often overlooked detail that makes all the difference between blurry shots and crisp images, or a mount that works for years and one that wears out quickly.

If you need help choosing the right mount for your equipment, or have questions about adjusting balance for your specific setup, reach out to our team. We’re here to help you get your gear working perfectly.
Night Vision Goggles References
Celestron. (2021). “Balance Your Equatorial Mount.” Celestron Support Documentation.
Meade Instruments. (2019). “Mount Balance: A Guide for Astrophotographers.” Meade Technical Resources.
Smith, J. (2020). “The Importance of Axis Balance in Precision Camera Mounts.” Journal of Industrial Photography Equipment and Systems.
Shenzhen Detyl Optoelectronics Co., Ltd.
With abundant experience, we are one of the most professional mounts manufacturers and suppliers in China. Please rest assured to buy customized mounts at competitive price from our factory. For pricelist and quotation, contact us now.
Address: 4th Floor, Building 3, Factory, No. 20, Second Industrial Avenue, Tangxiayong Community, Yanluo Street, Bao’an District, Shenzhen
E-mail: sales@detyl.com
WebSite: https://www.detyl.net/