Posted in

how to package egg trays made from equipment

Alright, let’s keep this real—you know, I get it. You’re deep in the egg tray game, either you just dropped big cash on a new egg tray machine from us, or you’re looking to make sure your existing setup is actually pulling its weight when it comes to packaging the final trays. I’ve been talking to clients about this for years, and half the time, people sleep on the packaging step like it’s just “throwing boxes and tape around.” Newsflash: that’s how you get trays crushed before they even hit the grocery store, or (worse) shipped out as your own product with dented cells. Let’s break this down like we’re hanging out in our workshop, not a stuffy trade show. egg Tray Equipment

First off, let’s start with the stuff your machine spits out. Wait—you’re using our equipment, right? Our machines crank out those paper-pulp trays that are still a little damp when they hit the conveyor at the end. Don’t even think about packaging them right away. I see people make this mistake all the time: they pull a fresh stack of trays off the drying line and start boxing them, and by the time they get to the customer, the pulp’s dried in a way that’s warped because they were smooshed tight while wet. Trust me, our operators have tested this—you need to let those trays reach a consistent ambient moisture level first. We’re talking 8-12% moisture content, not the 20% they’re at when they exit the press. How do you check that? No fancy lab gear needed—grab a moisture meter (you can get one at any hardware store, nothing fancy) or even just squeeze a corner: if it springs back without feeling squishy, you’re good to go. Skipping this step is like baking cookies and taking them out before they’re done—they fall apart the second you touch ’em.

Next, pick the right packaging materials, and don’t just go for the cheapest option. Let’s list what you actually need here, and why: first, the base. You can use corrugated boxes, obviously, but not just any corrugated. If you’re shipping locally, standard single-wall works, but if you’re sending them cross-country or even overseas? Double-wall, hands down. Those flutes add so much more cushioning, especially when a forklift slams into the pallet at the warehouse. Then, you need something to separate the layers of trays, right? Our trays come in stacks of 10 or 12, and if you just stack 50 stacks on top of each other, the bottom ones get crushed. So interleave those stacks with either thin kraft paper or even those cheap plastic sheets you can get at any packaging supply place. Wait, and don’t forget the edge protectors! If your boxes are sticking out beyond the pallet, those corners get beat up during shipping. Edge protectors (those little cardboard U-shaped things) slip over the box corners and take all the impact. I’ve had clients tell me they saved hundreds in damaged trays just by adding these. Also, tape—use heavy-duty packing tape, not that cheap stuff you use for moving boxes across your garage. 2-inch acrylic tape is the way to go; it sticks in rain, snow, whatever, and doesn’t come undone halfway through a cross-country road trip.

Wait, speaking of stacking—how do you actually arrange the trays inside the box? That’s the part most people get wrong. You don’t just dump a bunch of stacks in there haphazardly. Our trays are usually either 30-egg or 12-egg, right? For smaller trays, you want to stack them vertically, not horizontally. Wait, let me clarify: vertical means the open side of the tray is facing up, so the egg cups aren’t getting compressed. If you stack them horizontally, the weight of the top stacks will push those cups flat, and that’s useless. So arrange the stacks in the box in a grid—like 5 stacks long, 4 stacks wide, whatever fits, but leave a little breathing room on the sides (about an inch or so) so when you close the box, you’re not smooshing the edges of the trays. Oh, and put a layer of that kraft paper on the very bottom of the box, before you add any trays, and another layer on top before you close it. That way, if dust or dirt gets in during handling, it doesn’t settle on the trays, and it adds a tiny bit of extra cushioning.

Now, palletizing—this is where you can make or break your whole operation, especially if you’re working with our big automatic tray equipment that cranks out thousands per hour. First, don’t mix tray types on the same pallet. Wait, yeah, I know it’s tempting to save space, but if you’re mixing 30-egg and 12-egg trays, the different heights will make the pallet uneven, and when a truck hits a pothole, that whole stack tilts and trays break. Stick to one tray size per pallet, always. Then, the pallet itself—use heat-treated wooden pallets, not those cheap pallets you get for free at a hardware store that might have bugs. Wait, no, actually, heat-treated is required for international shipping anyway, so might as well just use that for everything. And when you’re stacking the boxes on the pallet, use a pattern that’s stable. The most common is the block pattern, right? You just lay each row straight, but if you want extra stability, use a brick pattern—each row is offset so the boxes lock into each other. That way, the whole pallet doesn’t slide sideways during shipping. Also, don’t stack too high! Our clients often want to fit as many boxes as possible, but if you stack more than 10 boxes high, the bottom boxes get crushed. I recommend max 8 boxes per pallet, unless you’re using double-wall boxes, then maybe 10. Test it: if you stack a pallet and you can push the top box down an inch, that’s too high.

And don’t skip the stretch wrap or strapping. Wait, which one is better? Honestly, it depends on how you’re moving the pallets. If you’re just using a forklift inside a warehouse, stretch wrap is fine—just wrap it tight, not so tight you crush the boxes. But if you’re shipping long distances, strapping is a must, because stretch wrap can tear if it gets caught on something. I like to use both, actually—wrap the pallet in stretch first, then add two or three straps around the sides (top, middle, bottom) for good measure. That way, even if the stretch wrap tears, the straps hold the whole thing together. Also, add a label! Wait, not just any label—make sure it has the type of tray, the quantity, and handle with care (fragile is overused, but these are fragile, so it’s okay). And if it’s being shipped overseas, make sure all the labels are in the right language, but that’s a whole other thing.

Wait, let’s talk about common mistakes I see all the time, because that’s what this is about—stuff you can fix right now, no new equipment needed. First, rushing the drying step. I get it, you want to get those trays out the door, but if they’re too damp when packaged, they’ll mold. Yep, mold. I had a client last year who packaged trays that were 15% moisture, and by the time they got to the customer, half the trays had green mold growing on them. That’s a quick fix: add a little extra drying time. We usually recommend a drying conveyor after our equipment, but even if you’re air-drying, just set up a few fans by the conveyor, that speeds it up. Second, using the wrong size boxes. If your box is too small, you’re smooshing the trays; too big, and the trays slide around and hit the edges. Measure your stack of trays first—length, width, height—and then buy boxes that are ½ inch bigger on each side. That tiny gap makes a huge difference. Third, not considering the environment. If you’re shipping to a place that’s really hot and humid, add a desiccant packet inside the box. Those little silica gel packs (you know, the ones that say “do not eat”) absorb moisture, so your trays don’t warp or get moldy. Super cheap, like a cent each, why not?

Wait, and a quick note if you’re using our semi-automatic or fully automatic egg tray equipment. We actually design our lines to integrate with packaging equipment, right? So if you have our equipment, you can even add an automatic wrapper or a palletizer that does all this stuff for you, so you don’t have to hire extra labor to stack and package. That’s a big one—our clients who upgrade to the automatic packaging line see a 30% drop in labor costs, because one person can oversee the whole packaging process instead of two or three. No more tired workers stacking trays wrong at the end of a long shift.

Let me test this with a real example, because stories stick. Last month, we had a client in Ohio who had been using a different brand of egg tray equipment, and their packaging was a mess—they were getting a 12% damage rate, which is huge, especially when you’re selling trays by the pallet. They switched to our line, and followed exactly the steps I just told you: waited for 10% moisture, used double-wall boxes, interleave paper, edge protectors, brick pallet pattern, stretch wrap plus straps. Their damage rate dropped to 1.5% in the first month. That’s not a fluke—this works. They saved like $2,000 a month on damaged trays, just by changing how they package.

So, if you’re already rocking our egg tray equipment, chances are you’re not using the full potential of your setup, and the packaging step is where you’re losing money. If you’re still in the market for equipment, this packaging part should be part of your conversation—any good supplier (that’s us, obviously) will walk you through the packaging needs for your specific output, because a line that cranks out 10,000 trays an hour needs a different packaging setup than one that does 1,000.

Wait, before I wrap this up, remember: this is all about balancing speed and quality. You don’t want to take 2 hours packaging a pallet that should take 20 minutes, but you also don’t want to ship a pallet of trash because you cut corners. The steps I laid out take a little extra time upfront, but they save you so much money on returns, damaged goods, and unhappy customers.

If you’re feeling stuck—like you’ve tried all this and still have issues, or you’re ready to upgrade your equipment to make packaging even easier—hit us up. We don’t do stuffy sales pitches; we’ll walk through your specific setup, answer all your questions, no pressure. Whether you need tips on adjusting your current process or want to talk about new equipment that simplifies packaging, we’re here. Don’t let bad packaging ruin all the hard work you put into making great egg trays.

Special Mortar Mixing Plant References:

  1. American Pulp and Paper Association. (2021). Best Practices for Packaging Molded Pulp Products.
  2. International Safe Transit Association. (2022). Packaging Guidelines for Paper-Based Shipping Products.
  3. Egg Industry Association. (2023). Post-Production Handling and Packaging for Egg Trays.

Shineye Mach Co., Ltd.
Shineye Mach Co., Ltd. is one of the most reliable manufacturers and suppliers of egg tray equipment in China, also supports customized service with reasonable price. Please feel free to buy advanced egg tray equipment made in China here from our factory. For quotation, contact us now.
Address: Jinzhou Circular Industry Park, Jinzhou City, Shijiazhuang City, Hebei Province, China
E-mail: xiangyijixielucia@yeah.net
WebSite: https://www.shineyemach.com/